Up to 10%
Yearly heating and cooling savings from setting the temperature back 7 to 10°F for 8 hours a day, per the DOE.
Smart & Programmable Thermostats
Smart Wi-Fi & Programmable Thermostat Installation and Repair in Kingston, PA
Serving Kingston, Dallas, Mountain Top, Pittston & Shavertown In Pennsylvania
- C-wire added if needed
- Programmed before we leave
- Heat pump–ready setup
Get My Quote
- PA License #PA169105
- Insured
- EPA 608 Certified
- Veteran-Owned
- Carrier Dealer
- Mitsubishi Electric Elite Diamond Contractor
Why Switch to a Smart Thermostat?
You want a home that's comfortable when you walk in, without paying to heat empty rooms all day. Switching to a smart thermostat does that, learning your routine and taking commands from your phone or voice assistant. KO HVAC installs, repairs, and sets up smart Wi-Fi and programmable thermostats across Kingston, PA.
Older West Side homes often have only two thermostat wires, while most smart models need a third, called a C-wire. We add one when it's missing, so your thermostat stays powered and online. That way, it can even alert your phone if the house gets cold enough to freeze the pipes.
About 8%
Average heating and cooling savings from an ENERGY STAR certified smart thermostat.
1 extra wire
The C-wire most smart thermostats need for constant power.
About 3 grams
The mercury inside each switch of an old dial thermostat, according to the EPA.
Thermostat Not Working Right? 6 Signs to Watch For
A thermostat problem can look like a furnace or AC problem, and it's often the cheaper fix. These six signs point to the thermostat itself. Checking it first can save you a bigger repair bill.
The display is blank or flickering.
The screen goes dark, dims, or reboots on its own. Dead batteries, a tripped breaker, or a smart thermostat losing power without a C-wire are the usual causes. If fresh batteries don't bring it back, the wiring or the unit needs a look.
The reading doesn't match the room.
The house feels warmer or colder than the screen says. A thermostat on a sunny wall, near a drafty door, or packed with dust can misread the room. Moving or replacing it often fixes comfort problems people blame on the furnace.
The system won't start or won't stop.
You change the setting, and nothing happens, or the heat keeps running past the target. A loose wire, a failed relay inside the thermostat, or the wrong system setting can cause it. We test the thermostat and the system together to find which one is at fault.
Schedules keep resetting.
Your programmed times vanish after a power flicker or a few weeks of use. Older programmable models lose their memory as they age, and some smart models drop settings when power is unsteady. A newer unit with steady power usually ends the reset cycle.
It's an old dial or mercury model.
A round dial with a glass bulb inside can't follow a schedule at all. That means paying to heat or cool the house while nobody's home. An upgrade adds scheduling and gets the mercury safely out of your home.
The Wi-Fi keeps dropping.
The app says offline, and remote control stops working. Thick plaster walls in older homes and long distances from the router are common culprits. We check the signal where the thermostat mounts and can suggest a better spot.
How Much Does Thermostat Replacement Cost in Kingston, PA?
A smart thermostat generally runs about $200 to $500 installed. A basic programmable model costs less, and adding a C-wire adds a little labor.
KO HVAC quotes the full price before anything goes on the wall, so you approve the exact number first. If your current thermostat seems broken, a repair visit starts with a $99 diagnostic. That visit shows whether the problem is the thermostat or the system behind it.
Programmable or Smart Wi-Fi Thermostat?
Which One Fits How You Live
A smart thermostat isn't always the better buy. If your schedule rarely changes, a programmable model saves energy for less money. We'll help you pick based on your system and how you use your home.
| Programmable thermostat | Smart Wi-Fi thermostat | |
|---|---|---|
| How you control it | Buttons on the wall and a weekly schedule | A phone app, voice assistant, or the wall |
| Learns your habits | No | Many models do |
| Energy reports | No | Usually, in the app |
| Needs Wi-Fi and a C-wire | No | Usually both |
| Upfront cost | Lower | Higher |
| Best for | Steady routines and simple systems | Changing schedules, heat pumps, and remote control |
What Makes KO HVAC Smarter Than a DIY Install?
The Setup Is Where the Savings Start
Compatibility checked before you buy.
Heat pumps, boilers, two-stage furnaces, and dual-fuel systems each need a thermostat that speaks their language. We confirm the model works with your equipment before it goes on the wall. That saves you from a return trip to the store.
Wiring done right, C-wire included.
Older homes often have thin, outdated thermostat wiring. We add a C-wire or an adapter when needed, so the thermostat has steady power. Every connection is checked before we turn the system back on.
Programmed around your weekly routine.
We set your schedule, connect the app, and show you how to adjust it. On heat pumps, we set the backup heat so it only kicks in when truly needed. That setting alone can keep winter bills in check.
Four Steps From Old Dial to Smart Thermostat
Each step is quick, and most of the work happens at the wall where your thermostat already sits.
Step 1
Tell Us What You Have Now
Call or book online. Share your heating and cooling type and, if you've already bought one, the thermostat model.
Step 2
A Look Behind the Wall Plate
A technician looks at your current wiring and equipment to confirm the new thermostat will work. If a C-wire is missing, we add one.
Step 3
Your New Thermostat Goes Up
We mount and wire the thermostat, connect it to Wi-Fi, and test heating and cooling from the new controls.
Step 4
A Quick Lesson on the App
We set your schedule together and show you the app's key features. You'll leave knowing how to adjust it from anywhere.
Get My Quote
Thermostat Went Dark? Let's Bring the Heat Back
Office Hours, After Hours, and What to Try First
A person answers our phones 24 hours a day, and the office books the earliest opening from 8 to 5. After hours, maintenance plan members can get emergency repairs at an after-hours rate. Before you call, two quick checks often bring the heat back.
Swap the Batteries First
Many thermostats run on AA or AAA batteries, even when wired. A fresh set can revive a blank screen in seconds.
Look for the Furnace Switch and Breaker
Near the furnace, look for a light switch that powers it, since it's easy to flip by mistake. Then check the breaker panel, and reset a tripped breaker one time.
Towns We Serve for Thermostat Installation Near Kingston, PA
Our technicians install and repair thermostats across Luzerne, Lackawanna, and Wyoming Counties, working out of our base in Kingston. The towns below see us most often.
Share your address when you book, and the office will check coverage first.
Luzerne County
- Kingston
- Edwardsville
- Forty Fort
- Wyoming
- Swoyersville
- Luzerne
- Larksville
- Wilkes-Barre
- Ashley
- Pittston
- Nanticoke
- Shavertown
- Dallas
- Harveys Lake
- Mountain Top
Lackawanna County
- Clarks Summit
- Scranton
- Old Forge
- Moosic
- Moscow
- Dalton
- Archbald
Wyoming County
- Tunkhannock
- Factoryville
KO HVAC120 Page Avenue, Unit 15, Kingston, PA 18704Hours 8 AM to 5 PM
What Homeowners Say After We Pack Up
The technician Lenny they sent out was extremely professional, knowledgeable and clean. He assess the situation, determined tge issue got it fixed in no time. I highly recommend them
Anthony J.
Great service on our home’s system! The technician found a failing capacitor and replaced it same day. I appreciated the thorough troubleshooting and clear explanation of the repair. Very happy with the work and would definitely recommend them!
Jason R.
The man was excellent, he checked the whole system gave me advice and wasted no time , i would recommend your comp any to anyone, any time i need a tech i I’m calling you guys TY
Thomas H.
KO HVAC did a great job changing my house from electric heat to natural gas forced hot air with AC. Cody and his team were wonderful to work with. Highly recommended.
Aaron H.
It was a pleasure to work with KO hvac. From the moment of making the initial call and getting set up, to the day of service it was a very smooth process. The communication was on point which is always greatly appreciated. Thanks Len!
Steven S.
Caleb was punctual and very professional and knowledgeable. Thanks!
Matt B.
Great service. Will definitely have them do all my hvac needs.
Mary N.
Caleb was professional & knowledgeable of the issues I had with my furnace.
Ray B.
This is an extremely professional group who does excellent work. They replaced our entire HVAC system and later added additional duct work. Incredibly smooth process from start to finish. Communication was excellent. Their crew was on time, professional and courteous. Highly recommend.
Ed B.
Steve and Caleb both very knowledgeable and good to deal with. Had an issue finding a leak in the system and they were able to find the problem. HIGHLY recommend.
Karen N.
FAQs
570-479-0603calls answered 24/7
How much does it cost to replace a thermostat?
Replacing a thermostat costs about $200 to $500 installed for a smart model, and less for a basic programmable one. The model, the wiring, and whether a C-wire needs adding move the total. KO HVAC gives you the full price before installing anything.
What's the best smart thermostat for my home?
The best one is the one that matches your system. Carrier systems often pair best with Carrier's own thermostats. Many other homes do well with popular brands like ecobee or Nest. Heat pumps and boilers need a model built for them, and we'll help you choose.
Can you install a Nest or ecobee thermostat I already bought?
In most cases, yes, once we confirm it works with your system and wiring. Bring the model name when you book, and we'll check compatibility before the visit. If it isn't a fit, we'll tell you before anything gets mounted.
Can I install a smart thermostat myself?
On a simple system with a C-wire, many homeowners can. Heat pumps, boilers, two-stage systems, and homes without a C-wire are trickier, and a wiring mistake can damage the equipment. A pro install also gets the backup heat and schedule set right.
Do smart thermostats work with heat pumps and boilers?
Many do, but not every model. Heat pumps need a thermostat that controls backup heat, and some boiler systems use different wiring. We confirm compatibility before installation so the thermostat runs your system correctly.
Why does my thermostat say "aux heat" or "em heat"?
Both refer to a heat pump's backup heat. "Aux heat" turns on automatically when the heat pump needs help, while "em heat" is a setting you switch on yourself. If aux heat runs constantly, the heat pump may need service.
Do I need a C-wire for a smart thermostat?
Most smart thermostats need one for steady power. Without it, some models drain their batteries or drop Wi-Fi. If your home doesn't have one, we can add it during installation.